Where there’s a will

The thing about owning old-style crafted anything – like desks, for instance – is that when it comes to repair and you don’t have a full woodworking studio and all the tools that come with it, sometimes you have to improvise.

One of the drawers has been sticking, badly, and I finally got fed up with it tonight. I unloaded it and found the sides of the drawer were bowing out of their joints at the front. There are no nails or screws in the construction of the drawers except in the handles: the sides were simply groove cut in a tight fit and glued. So, to get them back in order, I brought out my handy wood glue. On a tangent here,I also use the glue on the joints of the bee frames when I’m building those, as well, to supplement the staples, as the bees propolize everything and the top joints get the most pressure when you’re trying to get them out for inspection. Tangent over.

I reglued the joints and then used some heavy things I happen to have around instead of going outside for (wet) bricks. Books, of course. After this dries, I’ll turn it over to do the other side, using the same weights. There’s a notch toward the front so a metal frame for folders can be placed, but the frame joints are 1/4 inch, and the notches are slightly smaller than that – no doubt this is what has caused the tops portions of the sides of the drawer to lose their grip and not seat firmly in their joints. Luckily, I do have a 1/4 inch wood chisel to open those notches just a hair in order to get the metal frame to sit evenly.

Once this is repaired, it won’t be such an ordeal to get the drawer open and then closed once more, and that is a Good Thing.

 

Leave a Reply

Your email address will not be published. Required fields are marked *